Proud Sponser of
Jerry Cheney - 81
81 - Jerry Cheney


Modern Bikes
Honda® CRF450, Yamaha® YZF450, Kawasaki® KZ450, Suzuki® RMZ450 and KTM® Products
Products designed specifically with the Modern Bikes in mind.


Adjustable Fork Clamps  :   for Honda®,  Suzuki®, Yamaha®, Kawasaki® KTM® etc...
These fork clamps are made for Modern Bikes with a 8 1/2" center. Adjustable offsets range from 15 through 40. Each offset insert is design with 2 offset measurements. The clamps will come with one pair of centered offsets and a second pair of offsets. Additional offsets sold separately.

Adjustable Fork Clamps (8 1/2" center)$ 525
(includes one pair of centered offsets and one additional offset pair)
Additional Offset$ 55pair






Fork Head Adjustor
Change your rake with these Fork Head Adjustors. By inserting one adjustor in the top of your fork head you can position this for a +0.60 or -0.60 degrees over 30". Add an adjustor in the bottom of your fork head and now you have an adjustment of ~ +1 or -1 degree over the 30". Each Adjustor comes with Adjusting Offset, Race and Bearing.


To order you will need to supply the diameter, thickness and length of your fork head.

Price:
Single (3-piece set)  $ 85
Pair (two 3-piece sets)  $ 160
Cut your stem to fit  $ 50
New Stem  $ 120


Upper & Lower Fork Clamps and Front Axle Center Adapters
The Combo Kit assists in creating better handling of your bike. Designed to work with your bikes standard factory components. The Clamps have a 7 5/8" tube centers with a 68mm offset. The Front Axle Center Adapters relocates the front wheel's axle in line directly with the fork tubes. These adapters are most effective with fork clamps that have a 68mm-75mm offset and works with the factory standard wheels.

Available in both Gold or Silver. There is a bracket available to hold your front disk caliper which is sold separately for $25.00

Honda CRF450: 
Combo Kit ...while supplies lasts...$580combo
(does not include bracket)
Upper & Lower Fork Clamps$350set
Front Axle Center Adapters$260set
Front Disk Caliper Bracket$ 25each
Yamaha YZF450: 
Combo Kit ...while supplies lasts...$580combo
(includes handle bar clamps, does not include bracket)
Upper & Lower Fork Clamps$350set
Front Axle Center Adapters$260set
Front Disk Caliper Bracket$ 25each
Suzuki RMZ450: 
Combo Kit ...while supplies lasts...$600combo
(includes handle bar clamps, does not include bracket)
Upper & Lower Fork Clamps and handle bar clamps$370set
Front Axle Center Adapters$260set
Front Disk Caliper Bracket$ 25each
Kawasaki KX450: 
Combo Kit ...while supplies lasts...$600combo
(includes handle bar clamps, does not include bracket)
Upper & Lower Fork Clamps and handle bar clamps$370set
Front Axle Center Adapters$260set
Front Disk Caliper Bracket$ 25each
KTM: 
Combo Kit ...while supplies lasts...$620combo
(includes fork head stem & handle bar clamps, does not include bracket)
Upper & Lower Fork Clamps w/stem and handle bar clamps$390set
Front Axle Center Adapters$260set
Front Disk Caliper Bracket$ 25each






Shortened Swing Arm  :  
Swing Arm shortener Get better hook-up by getting your rear wheel underneath you -- Shorten your Swing Arm. This process modifies your current swing arm by shortening it in 3 places. We will slot the rear hole forward, cut out the shock mount and move it forward. Overall, you gain ~1 1/2".

You will need to send the link as well as the swing arm. Chain adjusters not included.

Honda CRF450$450
Suzuki RMZ450$450
Yamaha YZF450$450
Yamaha YZF426$450
Kawasaki KX450$450
KTM 450$450
Chain Adjusters$65/set




Swing Arm Yoke for Modern Bike shortened swing arms  :  
Swing Arm Yoke This swing arm yoke is available for Honda, Suzuki and Yamaha with shortened swing arms. Made from T-6061 Bar Stock. This swing arm yoke uses your bikes standard needle bearings.

  Price:
$ 165




Adjustable Fork Clamps  :   for Honda®,  Suzuki®, Yamaha®, Kawasaki® and KTM®
Adjustable Fork Clamps These fork clamps are made for 35mm-41mm tube holes with a 7 5/8" center. Adjustable offsets range from 40 through 75. Each offset insert is design with 2 offset measurements. The clamps will come with one pair of centered offsets and a second pair of offsets. Additional offsets sold separately.

Adjustable Fork Clamps (7 5/8" center)$ 465
(includes one pair of centered offsets and one additional offset pair)
Adjustable Fork Clamps (8 1/2" center)$ 525
(includes one pair of centered offsets and one additional offset pair)
Additional Offset$ 55pair




Foot Peg Relocation Kit  :  
wide Foot Pegs Original lowered footpeg: Lower right-hand direct extention flat track footrest conversion lowers the right-side foot peg down 2" and forward 1". Available for Honda, Yamaha, Kawasaki and KTM bikes. The relocation kit includes the linkage for the repositioning, mounting block and rubber foot peg.

NEW 7 degree angle blade & 1 1/2" longer lowered footpeg: We have fabricated a new lowered footpeg that has a blade angle of 7 degrees and also is 1 1/2 inches longer. This peg also comes with the rubber.

Pictures (top to bottom):
Lowered Right Foot Peg;
Lowered Right Foot Peg assembled with brake pedal;
New 7-degree Foot Peg;
Kawasaki KXF450 lowered Foot Peg on mount with Brake Pedal

Foot Peg Relocation Kit$ 145 kit
Foot Peg Relocation Kit w/o brake lever$ 125 kit
(right-side foot peg only)
7 degree Foot Peg Blade$36each
TT Foot Peg $ 115 set
(standard mount, steel blade and rubber)$ 60 each
Replacement Rubber$ 25 each




Quick Change Adapter Kit  :  
Honda Quick Change Adapter This Quick Change Adapter rests on top of the swing arm, holding the brake caliper in place while you remove the wheel to make adjustments during your race day. Kit includes Quick Change Bracket with chain adjustors, Axle, Spacers, Knock off nut, and Disk brake Center.

Available for Honda®, Yamaha®, Suzuki®, Kawasaki® and KTM®.

Quick Change Adapter Kit $ 280 kit


Front Wheels
Front WheelFront Spool/HubWide Axle spacerDisk Center The front wheel will arrive completely assembled, laced, and trued-up. Available in 16", 17", 18", or 19". The front wheel assembly includes the rim, spokes, and spool with either 17mm or 20mm sealed bearings. The TT wheel assembly includes the rim, spokes, one (1) knock-off nut and one (1) disk carrier. Tire, spacers, and axle not included. All components also sold individually.

All products Sold individually: Spools, Front TT Hubs, Spokes, Axles, Spacers and Disk Centers.

Sizes Available:   Price:
WM2   (1.90)   with spool $ 440 wheel
WM3   (2.15)   with spool $ 485 wheel
WM4   (2.50)   with spool $ 506 wheel
WM4.5   (2.75)   with spool $ 522 wheel
WM2   (1.90)   with TT Hub $ 530 wheel
WM3   (2.15)   with TT Hub $ 575 wheel
WM4   (2.50)   with TT Hub $ 596 wheel
WM4.5   (2.75)   with TT Hub $ 612 wheel
Individual Products Available: Price:
          TT Hub comes with 20mm sealed bearings, knock-off nut (1) and a set of spacers. $ 205each
          Spool with 17mm sealed bearings $ 125 each
          Spokes $ 85 36 bundle
          Spokes $ 90 40 bundle
          Axle - CRF450 20mm $ 55each
          Axle - RMZ450 $ 55each
          Axle - KTM450 20mm (orig 25mm) $ 110set
          Axle - YZF450 20mm $ 55each
          Axle - Custom $ call
          Spacers $ 22-55 set
           1 3/4"Front Disk Center $ 45 each
           2 1/2"Front Disk Center $ 45 each
           Knock Off Nut $ 25 each
           knock Off Wrench $ 35 each
           Bearings (ID= 17mm or 20mm) $ 12.50 each




Rear Wheels
The rear wheel will arrive completely assembled, laced, and trued-up. Available in 17", 18", or 19" for 32, 36 or 40 hole styles. The rear wheel assembly includes the rim, quick change hub, 25mm sealed bearings (2), sprocket/disk carriers (2), spokes, and knock off nuts. Tire, spacers and axle not included. All components also sold individually.

You can order either a 4" hub or a 5" hub. The use of a 5" wide hub produces a stronger rear rim. The way it works is the wider hub spreads apart the flanges, thus increasing the angle of the spoke to the rim. This combination provides more stability and less flex when riding at an angle. The 5" wide hub uses either 5/8" or 3/4" carriers.

Complete Quick Change Wheel:
Sizes Available:         Price:
            WM2   (1.85)   with Quick Change Hub                   $ 540 wheel
            WM3   (2.15)   with Quick Change Hub                   $ 565 wheel
            WM4   (2.50)   with Quick Change Hub                   $ 580 wheel
            WM5   (3.00)   with Quick Change Hub                   $ 605 wheel
            WM6   (3.50)   with Quick Change Hub                   $ 625 wheel

Save Money by using your own Rim!
Kit for Quick Change Wheel:
This kit includes a 4" or 5" QC Hub, 25mm sealed bearings (2), sprocket/disk carriers (2), knock-off nuts (2), carrier bolt set, and spokes.  $ 395 kit

Combination Saving --
Kit for Quick Change Wheel & Adapter:
Save money by using your own rim. This kit includes a 4" or 5" QC Hub, 25mm sealed bearings (2), sprocket/disk carriers (2), knock-off nuts (2), Carrier bolt set, Spokes, Spacers, Disk Center, Axle, QC bracket and chain adjusters.  $ 650 combo

Quick Change Hub Assembly Only:  
4" or 5" QC Hub, 25mm sealed bearings (2), sprocket/disk carriers (2), and knock-off nuts (2) $ 485 assembly
Quick Change Adapter Kit Only:  
comes with caliper bracket, chain adjustor (Left & Right), spacers, axle, disk carrier, and a knock-off nut. $ 280 kit
Individual Products:  
Quick Change Hub       $210
      (4" or 5" wide, 25mm sealed bearings)
Sprocket/Disk Carriers - 5/8"       $ 30 each
Sprocket/Disk Carriers - 3/4", 1", 1 1/8", 1 1/4"       $ 35 each
Sprocket/Disk Carrier Bolt Set       $ 18 set
  Short Bolt Set for 5/8" or 3/4" carriers
      (four 1 1/2" & four 1 3/4" bolts)
  Medium Bolt Set for 1" or 1 1/8" carriers
      (four 1 3/4" & four 2" bolts)
  Long Bolt Set for 1", 1 1/8" or 1 1/4" carriers
      (four 2" & four 2 1/4" bolts)
Knock-off Nuts       $ 25 each
        2-Prong
        Round with 4 holes
Knock-Off Wrench       $ 35 each
Spacers       $ 22-55 set
Rear Axles
      20mm end -- 15mm shaft       $ 55 each
      20mm end -- 17mm shaft       $ 55 each
      Custom to your specs       $ 55 each
Spokes - 8 guage       $ 85 bundle
Sprockets       $   1.25 tooth


Rims  only :  available in sizes listed below.
  
Type: Inches: Spokes: Size: Price:
Dimpled 18 36 or 40 WM2 (1.85) $ 195 each
Dimpled 19 32, 36 or 40 WM2 (1.85) $ 195 each
Dimpled 18 or 19 36 or 40 WM3 (2.15) $ 227 each
Dimpled 17 or 18 32, 36 or 40 WM4 (2.50) $ 228 each
Dimpled 19 36 or 40 WM4 (2.50) $ 248 each
-Shouldered "Lip Rim" 18 or 19 36 or 40 WM3 (2.15) $ 260 each
-Shouldered "Lip Rim" 18 36 or 40 WM4 (2.50) $ 260 each
17 36 WM2 (1.85) $ 228 each
19 32 WM4 (2.50) $ 252 each
18 or 19 36 or 40 WM5 (3.00) $ 269 each
19 40 WM6 (3.50) $ 287 each



Sales & Service
21716   117th Lane
Bloomfield, IA  52537
(641) 459-2212   Jerry Cheney
(512) 751-8811   Carlyn Cheney