Front & Rear Brake Assembly |
|
Front Brake Assembly Kit: comes with fork leg bracket, stainless steel braided brake hose, brake lever, handle bar control, master cylinder, disk center, brake disk (9 1/2", 10", or 12") and CRF450 twin piston caliper.
When ordering, will need to provide length of brake hose (eye-to-eye).
|
|
|
|
Rear Brake Assembly Kit with Nissin Caliper & Nissin Master Cylinder: comes with all components shown: disk brake (9 1/2", 10", or 12"), aluminum brake center, stainless steel braided brake line, mounting plate for Nissin caliper, Nissin master cylinder, banjo bolts, hydraulic line bolts, black hose, and brake fluid reservoir.
|
|
|
|
Rear Brake Assembly Kit with Nissin 2 Rotor Rear & Nissin Caliper: comes with all components: disk brake (9 1/2", 10", or 12"), aluminum brake center, stainless steel braided brake line, mounting plate for Nissin caliper, Nissin master cylinder, banjo bolts, hydraulic line bolts, black hose, and brake fluid reservoir.
|
|
|
|
Rear Brake Assembly Kit with Grimeca Caliper & Nissin Master Cylinder: comes with all components shown: disk brake, aluminum brake center, stainless steel braided brake line, mounting plate for Nissin caliper, master cylinder, banjo bolts, hydraulic line bolts and brake fluid reservoir.
|
|
|
|
Rear Brake Assembly Kit with Grimeca 2-piece old-sytle Caliper Bracket, Grimeca Caliper, Nissin Master Cylinder with Drag Link: comes with all components shown: disk brake, aluminum brake center, stainless steel braided brake line, mounting plate for caliper, master cylinder, banjo bolts, hydraulic line bolts, drag link and brake fluid reservoir. When ordering, will need to provide rod length.
|
|
Brake Caliper Hanger Bracket for Bembo Caliper (Brembo caliper not included) |
|
Price: |
12" Brake Disk with Caliper Bracket (Brembo caliper not included) | $210 combo
|
|
10 1/2" Brake Disk with Caliper Bracket (Brembo caliper not included) | $210 combo |
|
10 1/2" or 12" Brake Disk with Front Caliper Bracket (Brembo caliper not included) | $210 combo |
|
|
Front Brake Caliper Hanger Brackets (caliper not included) |
|
Front Brake Hanger is designed for the fork tubes that have mounting bolts located higher up the fork tube. It is also bi-directional allowing you to decide if you would like the set the caliper in front or behind the fork tubes.
|
|
Brake Disk |
|
Various Sizes for various bikes available
Price: |
9 1/2" Disk | $ 145 each |
10 1/2" Disk | $ 155 each |
12" Disk | $ 135 each |
12" Disk New Style | $ 165 each |
|
|
|
|
12" Floating Disk Ventilated with center for TT Hub or Quick Change Rear
|
|
|
|
12" Ventilated Disc for Quick Change Rear
|
|
|
|
10 1/2" Disk for Quick Change Rear Thickness = 4.5 mm
|
|
|
|
12" Disk for Quick Change Rear Thickness = 4.5 mm
|
|
Pull Brake Assembly |
|
Pull Style Brake Assembly for Grimeca master Cylinder. Comes with the mounting bracket, Adjustable brake lever and footpeg. The brake lever mounts under the foot peg and angles upward so it is level with the peg. As seen in the picture, there is an extra hole below the black pivot bolt so you have an optional mounting position which moves the lever down.
| Price: |
Complete assembly | $ 149 kit |
lever alone | $ 35 each |
|
|
Push Brake Assembly |
|
Push Style Brake Assembly with mounting spuds that are welded onto the frame. This assembly comes with the mounting bracket, brake lever and footpeg.
|
|
Bracket for Grimeca (pull-type) or Nissin (push-type) Master Cylinders |
|
Footrest/Brake Lever Bracket for Nissin Master Cylinder. TOP PICTURE: Bracket without the three mounting holes comes with steel spuds to weld on to your frame, then drill the bracket to fit the spuds.
MIDDLE PICTURE: picture is the Bracket with Mount holes already drilled.
BOTTOM PICTURE: Grimeca Bracket with Mount holes already drilled. Also available without mount holes drilled and mounting spuds.
Available in Anodized Gold or Silver; with or without mounting holes.
| | Price: |
| Bracket with steel spuds and screws   | $ 80 each |
| Bracket with Mount holes drilled   | $ 65 each |
|
|
Brake Caliper Brackets |
|
Available in Silver
| Price: |
1. Mini CR80 Caliper Bracket | | $ 48 each |
2. Nissin above Swing Arm - 45 degree forward | | $ 75 each |
3. Nissin below Swing Arm | | $ 75 each |
4. Grimeca Brake Caliper Bracket (Frame Mount) | | $ 75 each |
5. Grimeca Brake Caliper Bracket ( Mount) | | $ 65 each |
|
|
Brake Caliper Brackets for Brembo Brake Calipers |
|
Bracket for 10 1/2" Disk and Brembo Brake Caliper
|
|
|
Bracket for 12" Disk and Brembo Brake Caliper
|
|
|
Brembo Brake Caliper Hanger for 10 1/2" or 12" Disk
|
|
Brake Caliper Brackets for Nissin Brake Calipers |
|
45 degree Bracket for Nissin Caliper. This bracket only works with single shock set-ups. Unfortunately on a dual shock set-up, the shock, mount bracket, and caliper get in the away of each other.
|
|
|
Nissan Caliper Bracket for a Flat Track Framer 9 1/2", 10 1/2", or 12" Disk (Hanging)
|
|
|
Nissan Caliper Bracket for a Flat Track Framer 10 1/2" Disk (Hanging)
|
|
|
Nissan Caliper Bracket for Flat Track Framer 12" Disk (Verticle)
|
|
|
Nissan Caliper Bracket for Flat Track Framer 12" (Hanging)
|
|
|
Vertical Nissan Caliper Bracket for 12" disc Left-side mount (Rotax, etc...)
|
|
|
Nissan 45 degree Caliper Bracket for 9 1/2", 10 1/2" and 12" (Hanging) comes with floating axle spacer (not shown)
|
|
|
Nissin 2-Piston Caliper Rear Bracket for 9 3/4", 10 1/2" or 12" Discs
|
|
Honda Mini-Bike Brake Caliper Brackets |
|
Honda CR80 Caliper Bracket for Quick Change Mini-Bike Rear Wheel
|
|
|
Honda CRF150 Caliper Bracket
|
|
Old-Style Grimeca Caliper Bracket (Hanging or Vertical) |
|
TOP PICTURE: Standard Bracket
SECOND PICTURE: 2-Piece Bracket which provides for a 1/4" offset on either side of the mount bracket.
THIRD PICTURE: 45 degree Forward and down bracket. Works with the dual shock setups. Will also work in the upward position for bikes with a single shock set-up. Available for both a 10 1/2" or 12" Brake Disk.
| | Price: |
one-piece bracket (10 1/2" disk only) | (top picture) | $ 75 each |
two-piece bracket (10 1/2" or 12" disks) | (second picture) | $ 85 each |
45 degree bracket (10 1/2" or 12" disks) | (third picture) | $ 85 each |
|
|
Front Grimeca Brake Caliper Brackets |
|
Universal : Type I
|
|
|
|
Universal : Type II
|
|
Vertical Front Brake Hangers |
|
These vertical Front Brake Hangers work with Honda CRF450 calipers, Nissin Calipers to Ceriani-Betor forks, etc...
|
|
|
|
Universal front fork brake caliper hanger bracket for Honda designed for Nissan 2-piston front caliper. Configured for a narrow bolt pattern (2005 and newer).
|
|
|
|
Universal front fork brake caliper hanger bracket for Honda designed for Nissan 2-piston front caliper. configured for a wide bolt pattern (2004 and older).
|
|
|
|
Universal front fork brake caliper hanger bracket (left or right side mount).
|
|
Bracket for Nissan 2-Piston Front Caliper to 36mm EX500 Forks : |
|
Top Bracket for 101 bolt center
Bottom Bracket for 77 bolt center
Caliper not included
|
|
Drag Link and Brake Lever Rod: |
|
TOP PICTURE: Drag link for Gremica, Kelsey Hayes, hurst Airhart brake, etc... Mounts on the hanger bracket and holds the brake in position (like we had ~30 years ago).
SECOND PICTURE: Extra brake arm bar. Mounts between the brake pedal and arm on the Grimeca pull-type master cylinders.
| Price: |
Arm | $ 30 each |
Drag Link (eyes at both ends) | $ 45 each |
Both | $ 75 kit |
|
|
Disk Centers: |
|
12" Disk Center for Barnes-type Quick Change hubs with 4 mounting holes also available with 8 mounting holes (6 lightening holes)
|
|
|
Disk Center for Honda CRF450. Adapts a Honda CRF450 front disk to a Rear Quick Change Wheel.
|
|
|
Honda CRF85 Sprocket on Quick Change Wheel
|
|
|
Honda CRF150 Front Brake Disk Center to TT Hub.
|
|
|
Honda CRF150 Rear Brake Disk Center to quick Change wheel.
|
|
|
Honda CRF Rear Disk adapter (8-prong and 8 holes). This setup works with PM, Mercury and one-piece hub/wheels.
|
|
|
Honda CRF Rear Disk Adapter (4-hole)
|
|
|
Yamaha YZF450 Front Disk to TT or Mini-Bike Hubs (6-prong)
|
|
|
Yamaha YZF450 Front Disk to Rear Quick Change Hub. This setup will require you to remount your caliper.
|
|
|
|
Kawasaki KX 250/450 front disk center for front brake on TT Hub
|
|
|
|
Kawasaki KX 250/450 front disk center for Quick Change Rear Wheel
|
|
|
|
Disc Center for EBC 9 3/4" Disc to Front TT Hub
|
|
|
|
Disc Center for EBC 9 3/4" Disc to Rear Quick Change Hub
|
|
Brake Levers: |
|
TOP PICTURE: Cheney Frame Long lever, Cheney Frame Short lever, C&J lever, Grimeca Pull lever
SECOND PICTURE: Under the peg lever which curves upward to raise the toe 1 1/4"
THIRD PICTURE:
| |
Price: |
Nissan Long Brake Lever | | $ 35 each |
Nissan Short Brake Lever | | $ 35 each |
C&J Brake Lever | | $ 80 each |
Grimeca Brake Lever | | $ 35 each |
Under Curved Up Brake Lever | | $ 35 each |
|
|
Lower Long Brake Pedal (Top) Lower Short Brake Pedal (2nd from Top) Top Curved Brake Pedal (3rd from Top) available in both Long and Short lengths Pull type Brake Pedal Lower (4th from Top) Lower Long Brake Pedal Curved up 1" (Bottom)
|
|
Top Curved Brake Pedal - available in both Long and Short
|
|
Yamaha YZF450 under foot peg brake lever (2006 thru 2009).
| |
Price: |
"Above" or "Under" levers with extension | | $ 55 each |
Replacement extension | | $ 15 each |
|
|
Honda CRF450 curved lever.
| |
Price: |
Honda CRF450 curved lever | | $ 55 each |
|
|
Modern Bike "above" and "under" the foot rest brake pedals with extensions
| |
Price: |
"Above" or "Under" levers with extension | | $ 55 each |
Replacement extension | | $ 15 each |
|
|
|